OBD-II Fault Code

P1420: Catalyst Temperature Sensor Failure

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P1420.

System family

Powertrain

Manufacturer-specific

Repair category

Catalyst / exhaust emissions

Use this category to narrow your checks before replacing parts.

Severity

Medium

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What P1420 usually means

Catalyst Temperature Sensor Failure.

Common symptoms

Check Engine light; Poor drivability or reduced fuel economy depending on fault; Possible loss of power if catalyst is restricted

Likely causes

Aged catalytic converter; Exhaust leak; O2 sensor issue; Misfire or rich running damaging catalyst

Diagnostic checks

Scan all modules and record freeze-frame data before clearing codes; Check battery voltage and related fuses; Check for misfires/fuel trim issues first; Inspect exhaust leaks and compare upstream/downstream O2 sensor activity

Repair guidance

Fix engine running faults or exhaust leaks before replacing catalyst; Replace catalyst only after confirming it failed

Verification after repair

Clear code, road-test through the same drive condition, then rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.