OBD-II Fault Code

P1404: IAT - B Circuit Malfunction/ Exhaust Gas Recirculation Closed Position Performance

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P1404.

System family

Powertrain

Manufacturer-specific

Repair category

Electrical circuit / sensor

Use this category to narrow your checks before replacing parts.

Severity

Medium

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What P1404 usually means

IAT - B Circuit Malfunction/ Exhaust Gas Recirculation Closed Position Performance.

Common symptoms

Check Engine light; Poor drivability or reduced fuel economy depending on fault

Likely causes

Signal out of expected range; Mechanical issue affecting sensor reading; Slow/sticking actuator

Diagnostic checks

Scan all modules and record freeze-frame data before clearing codes; Check battery voltage and related fuses; Compare live data to expected value and inspect mechanical operation

Repair guidance

Repair mechanical cause, clean/replace sticking actuator, or replace sensor after confirmation

Verification after repair

Clear code, road-test through the same drive condition, then rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.