OBD-II Fault Code

P1369: Engine Temperature Light Monitor Failure

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P1369.

System family

Powertrain

Manufacturer-specific

Repair category

Cooling system

Use this category to narrow your checks before replacing parts.

Severity

High

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What P1369 usually means

Engine Temperature Light Monitor Failure.

Common symptoms

Check Engine light; Poor drivability or reduced fuel economy depending on fault; Temperature gauge abnormal; Overheating or slow warm-up possible

Likely causes

Low coolant; Faulty thermostat; Coolant temperature sensor/wiring fault; Cooling fan issue

Diagnostic checks

Scan all modules and record freeze-frame data before clearing codes; Check battery voltage and related fuses; Check coolant level only when engine is cool; Compare scan-tool temperature to actual temperature

Repair guidance

Repair leaks, replace thermostat/sensor/fan component after confirming fault

Verification after repair

Clear code, road-test through the same drive condition, then rescan

Note: Never open hot cooling system cap; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.