OBD-II Fault Code

P1262: Cylinder #2 High To Low Side Short

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P1262.

System family

Powertrain

Manufacturer-specific

Repair category

Electrical circuit / sensor

Use this category to narrow your checks before replacing parts.

Severity

Medium

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What P1262 usually means

Cylinder #2 High To Low Side Short.

Common symptoms

Check Engine light; Poor drivability or reduced fuel economy depending on fault

Likely causes

Low signal voltage; Weak power supply; High resistance/poor ground; Failed sensor; High signal voltage; Open ground; Short to voltage

Diagnostic checks

Scan all modules and record freeze-frame data before clearing codes; Check battery voltage and related fuses; Check sensor reference voltage, ground and signal voltage; Check sensor ground and signal circuit for short to voltage

Repair guidance

Repair poor ground/power feed or replace confirmed faulty sensor; Repair ground/signal circuit or replace confirmed faulty sensor

Verification after repair

Clear code, road-test through the same drive condition, then rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.