OBD-II FAULT CODE
P0229
Throttle/Petal Position Sensor/Switch C Circuit Intermittent
Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P0229.
- Check Engine light
- Poor drivability or reduced fuel economy depending on fault
- Reduced power / limp mode possible
- Hesitation or unstable idle
- Dirty throttle body
- Faulty throttle/pedal position sensor
- Wiring/connector fault
- Adaptation needed
- Loose connector
- Scan all modules and record freeze-frame data before clearing codes
- Check battery voltage and related fuses
- Inspect throttle body and connector
- Check sensor correlation data with scan tool
- Wiggle-test harness while watching live data
- Clean throttle body if appropriate, repair wiring, perform throttle relearn, replace failed sensor/body after testing
- Clean/secure connector and repair damaged harness
Related Codes
Need more help?
Search manuals, wiring diagrams and technical service bulletins.
Not sure what to do next?
Get step-by-step instructions and professional repair information.
Disclaimer: Information is provided for general guidance only and may not apply to all vehicles. Always consult a qualified technician.