OBD-II FAULT CODE
P0085
Exhaust Valve Control Solenoid Circuit Low (Bank 2)
Meaning, symptoms, likely causes, diagnostic checks and repair guidance for P0085.
- Check Engine light
- Poor drivability or reduced fuel economy depending on fault
- Harsh shifting, limp mode, slipping or delayed engagement possible
- Low/dirty transmission fluid
- Solenoid/valve body issue
- Wiring fault
- Internal transmission wear
- Low signal voltage
- Scan all modules and record freeze-frame data before clearing codes
- Check battery voltage and related fuses
- Check transmission fluid level/condition using correct procedure
- Scan TCM data and inspect connector/wiring
- Check sensor reference voltage, ground and signal voltage
- Service/repair fluid or wiring issues first, test solenoid/valve body, seek transmission specialist for internal faults
- Repair poor ground/power feed or replace confirmed faulty sensor
Related Codes
Need more help?
Search manuals, wiring diagrams and technical service bulletins.
Not sure what to do next?
Get step-by-step instructions and professional repair information.
Disclaimer: Information is provided for general guidance only and may not apply to all vehicles. Always consult a qualified technician.