OBD-II Fault Code

C1943: Airbag Deployment Indication Input Fault

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for C1943.

System family

Chassis

Manufacturer-specific

Repair category

SRS / restraint

Use this category to narrow your checks before replacing parts.

Severity

High

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What C1943 usually means

Airbag Deployment Indication Input Fault.

Common symptoms

Airbag/SRS warning lamp; Safety restraint system may be disabled

Likely causes

Loose SRS connector; Damaged seat/impact sensor wiring; Faulty sensor/module; Low voltage history

Diagnostic checks

Inspect wheel/brake/suspension area, connectors, sensor wiring and module power/ground; Do not probe SRS wiring with a test light; Check for related service bulletins and connector lock issues

Repair guidance

Have SRS wiring, sensors and module diagnosed with OEM-level scan tool; Repair connector/wiring faults using approved SRS procedures

Verification after repair

Clear code, road-test safely at low speed first, then rescan

Note: Safety-critical: SRS/airbag repairs should be handled by a qualified technician; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.