OBD-II Fault Code

B2560: Aux A/C Blower Motor Relay Circuit Short to Ground

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for B2560.

System family

Body

Generic/SAE

Repair category

HVAC / climate control

Use this category to narrow your checks before replacing parts.

Severity

Low

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What B2560 usually means

Aux A/C Blower Motor Relay Circuit Short to Ground.

Common symptoms

Body/accessory warning lamp or feature not working

Likely causes

Faulty control head/switch; Blend door actuator fault; Blower resistor/motor issue; Wiring/fuse fault; Wire shorted to chassis/ground; Internal component short

Diagnostic checks

Check related fuses, connectors, grounds and switch/module power supply; Check HVAC fuses, actuator movement and scan-tool HVAC data if available; Inspect harness for rubbing/pinch points and check resistance to ground

Repair guidance

Repair wiring/fuse issue, replace failed actuator/motor/control part after testing; Repair insulation/harness damage or replace internally shorted component

Verification after repair

Operate the affected body/accessory system and rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary. A DTC identifies a circuit or system condition, not always the failed part.