OBD-II Fault Code

B2462: Aux Heater Flame Out Fault

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for B2462.

System family

Body

Generic/SAE

Repair category

HVAC / climate control

Use this category to narrow your checks before replacing parts.

Severity

Low

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What B2462 usually means

Aux Heater Flame Out Fault.

Common symptoms

Body/accessory warning lamp or feature not working

Likely causes

Faulty control head/switch; Blend door actuator fault; Blower resistor/motor issue; Wiring/fuse fault

Diagnostic checks

Check related fuses, connectors, grounds and switch/module power supply; Check HVAC fuses, actuator movement and scan-tool HVAC data if available

Repair guidance

Repair wiring/fuse issue, replace failed actuator/motor/control part after testing

Verification after repair

Operate the affected body/accessory system and rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary. A DTC identifies a circuit or system condition, not always the failed part.