OBD-II Fault Code

B1570: Lamp Headlamp High-Beam Circuit Short To Ground

Meaning, symptoms, likely causes, diagnostic checks and repair guidance for B1570.

System family

Body

Manufacturer-specific

Repair category

Lighting

Use this category to narrow your checks before replacing parts.

Severity

Medium

Severity is a general guide. Confirm with scan-tool data and vehicle symptoms.

What B1570 usually means

Lamp Headlamp High-Beam Circuit Short To Ground.

Common symptoms

Body/accessory warning lamp or feature not working

Likely causes

Blown bulb/LED module; Poor ground; Fuse/relay fault; Switch/module/wiring issue; Wire shorted to chassis/ground; Internal component short; High signal voltage; Open ground; Short to voltage; Failed sensor

Diagnostic checks

Check related fuses, connectors, grounds and switch/module power supply; Check bulb/module, fuse, ground and connector corrosion; Inspect harness for rubbing/pinch points and check resistance to ground; Check sensor ground and signal circuit for short to voltage

Repair guidance

Replace failed bulb/module, repair ground/wiring, replace switch/relay if confirmed; Repair insulation/harness damage or replace internally shorted component; Repair ground/signal circuit or replace confirmed faulty sensor

Verification after repair

Operate the affected body/accessory system and rescan

Note: Confirm vehicle make/model/year because manufacturer-specific codes can vary; Manufacturer-specific: confirm definition and test steps in the vehicle service manual. A DTC identifies a circuit or system condition, not always the failed part.